Some pics

So while my dad (still!) has my camera, my dinky camera on my phone will have to do. Last night, I was able to blow apart my front suspension to rebush and replace the ball joints. So much crud on the tie rods! I may have to search for a pressure washer to clean up underneath the car. Also debating if I want to spray some undercoat over the bottom side of the car, or at least just the fender wells.

Lower arms from another subframe I had will make it's way to the Cortina. The old ones on the Cortina were all bent and made the driverside wheel push up into the fender. Cleaned, fresh coat of paint and rebushed.

Picture of the header we were working on. It's a cheapy OBX header, made for a 16 Valve RWD Corolla. Cut/welded/tweaked to fit on the 20 Valver and into a Cortina. Had to add a tab to the manifold so it would bolt up flush to the engine.

Andy here measuring out the tab needed on a piece of stainless

Hopefully I'll have my camera back soon and will have more progress pix.